Difference between revisions of "Hardware: Raspberry Pi"
From Luky-Wiki
Lukas Dzunko (talk | contribs) (Created page with " '''Attention: this page is work in progress.'''") |
Lukas Dzunko (talk | contribs) |
||
| Line 1: | Line 1: | ||
'''Attention: this page is work in progress.''' | '''Attention: this page is work in progress.''' | ||
| + | |||
| + | |||
| + | ro,bg,hard,rsize=32768,wsize=32768,vers=3,tcp | ||
| + | |||
| + | |||
| + | |||
| + | Voltage between 4.75 and 5.25 volts is fine. | ||
| + | But, below 4.8V, some instability can be expected on 3v3 regulator (RG2). | ||
| + | Don't exceed 5.6V, its trip D17 over voltage protection diode. | ||
Revision as of 17:32, 17 October 2013
Attention: this page is work in progress.
ro,bg,hard,rsize=32768,wsize=32768,vers=3,tcp
Voltage between 4.75 and 5.25 volts is fine. But, below 4.8V, some instability can be expected on 3v3 regulator (RG2). Don't exceed 5.6V, its trip D17 over voltage protection diode.
